Installing tile quarter round is an important part of tiling a room. It adds a nice finished look to the tile job and helps protect the edges of the tile. It also hides any small gaps that may exist between the wall and the tile. Here are some tips on how to properly install tile quarter round.
First, you need to use the right type of quarter round for your tile. If you are using ceramic tile, make sure you use a ceramic quarter round. For natural stone tile, use a natural stone quarter round. This will ensure that your quarter round blends in with the rest of the tile and looks natural.
Second, you need to measure the area where the quarter round will go. Measure from the inside corner of the room to the wall and make sure to leave enough space for the quarter round. It should be about 1/4 inch from the wall. This will allow the quarter round to fit properly and look nice.
Third, you need to cut the quarter round to fit the area. Make sure to use a wet saw or tile cutter to ensure a clean cut. If you are using a wet saw, make sure to use the right blade for the type of tile you are using. Once you have cut the quarter round, you can start installing it.
Fourth, you need to apply tile adhesive to the back of the quarter round. Make sure to spread the adhesive evenly. Then, press the quarter round firmly into place onto the wall. Make sure to wipe away any excess adhesive. Lastly, you need to grout the quarter round. Use a grout that matches the tile and spread it evenly over the quarter round. Let the grout dry for 24 hours before walking on it.
Related Posts
