Replacing the tile in your shower can be a daunting task, but with the right tools and instructions, you can have a new, updated look in no time. Replacing shower tile is a relatively simple job that any homeowner can do, as long as they have some basic DIY skills and knowledge. Here are the steps to follow when replacing shower tile:
1. First, you need to remove the old tile. This can be done by chipping away the grout and the old tile with a chisel and hammer. Be sure to wear protective eyewear when chiseling and hammering the old tile. Once the old tile is removed, you should check the wall for any signs of moisture damage before installing the new tile.
2. Next, you’ll need to prepare the walls for the new tile. This includes cleaning the walls of any dirt and grime and applying a waterproof membrane to ensure that the new tile will remain in place. Once the walls are prepped, you’ll need to measure the area where the tile will be installed and mark it with a pencil or marker.
3. Now it’s time to install the new tile. Start in a corner and apply adhesive to the wall. Place the tile in the adhesive and press it firmly into place. Continue to install the tile in this manner until the entire area is covered. Allow the adhesive to dry for the recommended amount of time before grouting.
4. Once the adhesive is completely dry, you can begin grouting the tile. Use a grout float to apply the grout in a uniform manner. Once the grout is applied, use a damp sponge to wipe away any excess grout. Allow the grout to dry for the recommended amount of time before using the shower.
5. Finally, you need to seal the grout. This will help keep the grout looking new and prevent water damage. Apply the sealant using a paintbrush and allow it to dry for the recommended amount of time before using the shower. With these simple steps, you can easily replace the tile in your shower and have a beautiful, updated look.
/Workman-Tiling-a-Shower-499630724-56a4a1a33df78cf7728353cc.jpg)
Related Posts
