How To Remove Asbestos Floor Tile Adhesive From Inside

Asbestos floor tile adhesive is a hazardous material that can release harmful asbestos fibers into the air when disturbed. If you are planning to remove asbestos floor tile adhesive from inside your home, it is important to take the proper precautions to protect yourself and your family.

The first step is to determine if the adhesive contains asbestos. If the adhesive was installed before 1980, it is likely to contain asbestos. You can test the adhesive by sending a sample to a laboratory for analysis.

Once you have confirmed that the adhesive contains asbestos, you need to take the following steps to remove it safely:

Wear protective gear. When removing asbestos floor tile adhesive, it is important to wear protective gear, including a respirator, gloves, and eye protection.
Ventilate the area. Open windows and doors to ventilate the area where you will be working. This will help to prevent the spread of asbestos fibers.
Wet the adhesive. Use a wet sponge or cloth to wet the adhesive. This will help to prevent dust from forming when you remove the adhesive.
Scrape off the adhesive. Use a scraper to carefully scrape off the adhesive. Be sure to avoid sanding or grinding the adhesive, as this can create dust.
Dispose of the adhesive. Place the adhesive in a sealed container and dispose of it according to your local regulations.

Once you have removed the asbestos floor tile adhesive, you need to clean the area thoroughly. Use a vacuum cleaner with a HEPA filter to remove any remaining asbestos fibers. You should also wet-mop the area with a detergent solution.

If you have any concerns about removing asbestos floor tile adhesive yourself, you can hire a professional asbestos removal contractor. Professional asbestos removal contractors are trained and certified to remove asbestos safely.