Can You Put Floating Floor Boards Over Tiles In Bathroom

Can You Put Floating Floor Boards Over Tiles In Bathroom?

Floating floor boards are a popular choice for bathrooms because they are waterproof, durable, and easy to install. However, it is important to note that floating floor boards can only be installed over certain types of subfloors, including concrete, plywood, and some types of vinyl. If you have tiles in your bathroom, you will need to remove them before installing floating floor boards.

The process of removing tiles from a bathroom can be time-consuming and messy. However, it is important to do this correctly in order to ensure that the floating floor boards are installed properly. Here are the steps on how to remove tiles from a bathroom:

Remove all of the fixtures from the bathroom. This includes the toilet, sink, vanity, and mirror.
Cover the floor with a drop cloth. This will help to protect the floor from damage.
Use a hammer and chisel to break up the tiles. Start by scoring the tiles around the edges with a utility knife. Then, use the hammer and chisel to break the tiles into smaller pieces.
Scrape away the old adhesive. Once the tiles have been broken up, you will need to scrape away the old adhesive. You can use a putty knife or a floor scraper for this task.
Clean the subfloor. Once the old adhesive has been removed, you will need to clean the subfloor. You can use a broom or a vacuum cleaner to remove any dust or debris.

Once the subfloor has been cleaned, you can begin installing the floating floor boards. Here are the steps on how to install floating floor boards over tiles in a bathroom:

Start by laying out the floating floor boards in the bathroom. This will help you to determine how many boards you need and where they will go.
Apply a layer of underlayment to the subfloor. This will help to cushion the floor and prevent squeaking.
Start installing the floating floor boards. Begin by snapping the first board into place along one of the walls. Then, continue snapping the boards together until you reach the other side of the room.
Trim the last board to fit. You will need to use a saw to trim the last board to fit the space.
Install the baseboards. The baseboards will help to cover the gap between the floor and the wall.

Once the floating floor boards have been installed, you can reinstall the fixtures and enjoy your new bathroom floor.