Grouting your bathroom tiles is a great way to give a neat and professional finish to the tiling project. It is also an important step in sealing the tiles, preventing water from seeping through any gaps. It is relatively easy to do and with a few simple steps you can achieve a perfect result.
Before starting, you should make sure that the area is clean and free from dust. Use a damp cloth to remove any dirt or debris and let the area dry completely. To begin, mix up the grout according to the manufacturer’s instructions. If mixing up a large quantity, break it down into smaller batches as it is easier to work with.
Using a rubber float, spread the grout evenly over the tiles ensuring that it is worked into the gaps. Remove any excess grout with the float and make sure to avoid leaving any pools of grout. Leave the grout to set for a few minutes, then use a damp cloth to wipe away any excess. Make sure to use a circular motion to ensure that all of the grout is removed.
Once the grout has dried, use a grout sealer to protect it from dirt and stains. This will also help to ensure that the grout remains waterproof. Make sure to apply the sealer in a well-ventilated area and follow the instructions provided by the manufacturer. Once the sealer has been applied, the grout should be left to dry for at least 24 hours before it is exposed to water.
That’s all there is to it! Grouting your bathroom tiles is a relatively easy job that will give a neat and professional finish to your tiling project. Make sure to take your time and follow these steps carefully to achieve the perfect result.
/hand-spreading-grout-on-tiles-with-grout-spreader-80033352-583c5e073df78c6f6a2f22b6.jpg)
:max_bytes(150000):strip_icc()/How_to_Regrout_Ceramic_Tile_64434_08-63a0298cea2a47ba985a0a17ed65d278.jpg)
Related Posts
