How To Repair Broken Floor Tile In Bathroom

How to Repair Broken Floor Tile in Bathroom

A broken floor tile in the bathroom can be an eyesore and a hazard. Fortunately, it is a relatively easy repair that can be done by most do-it-yourselfers. With the right tools and materials, you can have your bathroom floor looking like new in no time.

Here are the steps on how to repair a broken floor tile in bathroom:

1. Safety first

Before you start, make sure to wear safety glasses and gloves. You will also need to turn off the water supply to the bathroom and remove any furniture or fixtures that are in the way.

2. Remove the broken tile

Use a chisel and hammer to carefully remove the broken tile. Be careful not to damage the surrounding tiles.

3. Clean the area

Once the broken tile is removed, clean the area thoroughly with a damp sponge. Make sure to remove all of the old grout and adhesive.

4. Apply new adhesive

Apply a thin layer of new tile adhesive to the area where the new tile will be installed. Use a notched trowel to spread the adhesive evenly.

5. Install the new tile

Place the new tile in the adhesive and press down firmly. Use a level to make sure that the tile is level with the surrounding tiles.

6. Grout the tile

Once the tile is installed, apply grout to the joints between the tiles. Use a grout float to spread the grout evenly. Allow the grout to dry completely.

7. Seal the grout

Once the grout is dry, apply a grout sealer to protect it from water and stains. Allow the sealer to dry completely.

8. Clean up

Once the sealer is dry, clean up any excess grout or adhesive. Your bathroom floor is now repaired and looking like new!

Tips

If the broken tile is large, you may need to cut a new tile to fit. Use a tile saw to make a clean cut.
If the broken tile is in a difficult-to-reach area, you may need to use a drill to remove it.
Be sure to use the correct type of tile adhesive and grout for your bathroom floor.
Allow the adhesive and grout to dry completely before using the bathroom.