How To Replace Broken Tile In Shower Floor Singapore Style

Replacing broken tiles in your shower floor can be a daunting task, but it doesn't have to be. With the right tools and a little bit of patience, you can do it yourself and save yourself a lot of money. Here's a step-by-step guide to help you get the job done.

Step 1: Gather your tools and materials

You will need the following tools and materials to replace a broken tile in your shower floor:

A hammer or tile chisel
A cold chisel
A pry bar
A notched trowel
Thin-set mortar
Grout
A grout float
A sponge
A bucket
Safety glasses
Gloves

Step 2: Remove the broken tile

Start by removing any loose or damaged tiles around the broken tile. Once the area is clear, use a hammer or tile chisel to break up the broken tile into smaller pieces. Be careful not to damage the surrounding tiles.

Step 3: Clean the area

Once the broken tile is removed, clean the area thoroughly with a sponge and water. Remove any dirt or debris that could interfere with the adhesion of the new tile.

Step 4: Apply thin-set mortar

Using a notched trowel, apply a layer of thin-set mortar to the area where the new tile will be placed. Be sure to spread the mortar evenly and to leave no gaps.

Step 5: Place the new tile

Place the new tile on the thin-set mortar and press down firmly. Use a level to make sure that the tile is level with the surrounding tiles.

Step 6: Grout the tile

Once the tile is in place, grout the tile using a grout float. Be sure to fill all of the joints between the tiles completely.

Step 7: Clean the grout

Once the grout has dried, clean the grout with a sponge and water. Remove any excess grout that may have gotten on the tiles.

Step 8: Seal the grout

To protect the grout from moisture, seal the grout with a grout sealer. Apply the sealer according to the manufacturer's instructions.

Step 9: Let the shower dry

Allow the shower to dry completely before using it. This will give the grout time to cure and harden.

Replacing a broken tile in your shower floor is a relatively simple task that can be completed in a few hours. With the right tools and a little bit of patience, you can do it yourself and save yourself a lot of money.