Can You Put Luxury Vinyl Plank Flooring Over Tile

Can You Put Luxury Vinyl Plank Flooring Over Tile?

Luxury vinyl plank (LVP) flooring is a popular choice for homeowners who want the look of hardwood or stone flooring without the high cost or maintenance. LVP is also relatively easy to install, making it a DIY-friendly project. One question that often comes up is whether or not you can put LVP flooring over tile. The answer is yes, you can install LVP over tile, but there are a few things you need to do to ensure a successful installation. ### 1. Prepare the Tile Floor The first step is to prepare the tile floor by cleaning it thoroughly. Remove any dirt, dust, or debris from the surface of the tile. You can use a vacuum cleaner or a broom and dustpan to clean the floor. Once the floor is clean, you need to inspect the tiles for any damage. Look for any cracked or broken tiles. If you find any damaged tiles, you will need to replace them before installing the LVP flooring. ### 2. Level the Tile Floor The next step is to level the tile floor. If the tile floor is uneven, the LVP flooring will not be able to be installed properly. You can use a self-leveling compound to level the tile floor. To use a self-leveling compound, you will need to mix it with water according to the manufacturer's instructions. Then, you will need to pour the self-leveling compound onto the tile floor and spread it out with a trowel. Allow the self-leveling compound to dry completely before proceeding with the next step. ### 3. Install the Underlayment The next step is to install the underlayment. The underlayment will help to cushion the LVP flooring and prevent it from being damaged. You can use a variety of different underlayments, such as cork, foam, or rubber. To install the underlayment, simply roll it out over the tile floor and cut it to size. You can use a utility knife to cut the underlayment. ### 4. Install the LVP Flooring Now you are ready to install the LVP flooring. Start by installing the first row of LVP planks along the longest wall in the room. Use a spacer to create a gap between the wall and the LVP planks. Once the first row of LVP planks is installed, you can continue installing the rest of the planks in the room. Work your way from one end of the room to the other, and stagger the joints between the planks. When you reach the end of a row, you will need to cut the last plank to size. Use a utility knife to score the plank and then snap it off. ### 5. Finish the Installation Once all of the LVP planks are installed, you need to finish the installation by adding trim and molding. You can use a variety of different trim and molding options, such as baseboards, quarter round, and T-molding. To install the trim and molding, simply measure and cut the pieces to size and then attach them to the wall or floor using nails or screws. ### Conclusion Installing LVP flooring over tile is a relatively easy project that can be completed in a few hours. By following the steps outlined in this article, you can ensure a successful installation.